Alpha-phase indium selenide (α-In2Se3) is a promising material for next-generation solar cells. In this study, researchers demonstrated that α-In₂Se₃exhibits a peculiar way of generating electricity from light called the bulk photovoltaic effect. Based on their experimental results, α-In₂Se₃-based devices could achieve remarkable performance in solar cells, paving the way for reliable renewable energy generation to achieve carbon neutrality. Credit: zakzak 7 at Openverse ( https://openverse.org/image/46233968-b662-4fb5-bfcd-64d5c2795410). CC BY.

Researchers explore the bulk photovoltaic effect in a promising material for next-generation solar harvesting technologies.

The bulk photovoltaic (BPV) effect is an uncommon phenomenon that may enable certain materials to outperform the conventional p–n junctions used in solar cells.

In a recent study, researchers from Japan have experimentally demonstrated the BPV effect in alpha-phase indium selenide (α-In₂Se₃) for the first time along the out-of-plane direction, validating previous theoretical predictions.

The remarkable conversion efficiency recorded in their α-In₂Se₃ device signals a promising advancement for future solar cell technologies and photosensors.

Trade-off

A firm understanding of the photovoltaic effect, by which light can be converted into useful electrical energy, lies at the core of solar cell design and development.

Today, most solar cells employ p–n junctions, leveraging the photovoltaic effect that occurs at the interface of different materials.

However, such designs are constrained by the Shockley-Queisser limit, which puts a hard cap on their theoretical maximum solar conversion efficiency and imposes a trade-off between the voltage and current that can be produced via the photovoltaic effect.

However, certain crystalline materials exhibit an intriguing phenomenon known as the bulk photovoltaic (BPV) effect.

In materials lacking internal symmetry, electrons excited by light can move coherently in a specific direction instead of returning to their original positions.

This results in what is known as ‘shift currents’, leading to the generation of the BPV effect.

Although experts have predicted alpha-phase indium selenide (α-In₂Se₃) to be a possible candidate to demonstrate this phenomenon, it hasn’t yet been experimentally investigated.

To fill this knowledge gap, a research team from Japan led by Associate Professor Noriyuki Urakami from Shinshu University set out to explore the BPV effect in α-In₂Se_3. 

Urakami said: “This material has recently become a hot topic in the field of condensed matter physics, as it might be able to generate a shift current. Our study is the first to experimentally demonstrate this prediction.”

Wide range of frequencies

First, the researchers produced a layered device composed of a thin α-In₂Se₃ layer sandwiched between two transparent graphite layers.

These graphite layers served as electrodes and were connected to a voltage source and an ammeter to measure any generated currents upon light irradiation.

Notably, the team employed this specific arrangement of layers because they focused on the shift currents occurring in the out-of-plane direction in the α-In₂Se₃ layer.

After testing with different external voltages and incident light of various frequencies, the researchers verified the existence of shift currents in the out-of-plane direction, confirming the abovementioned predictions.

The BPV effect occurred throughout a wide range of light frequencies.

Most importantly, the researchers gauged the potential of the BPV effect in α-In₂Se₃ and compared it to that in other materials.

Urakami said: “Our α-In₂Se₃ device demonstrated a quantum efficiency several orders of magnitude higher than other ferroelectric materials, and a comparable one to that of low-dimensional materials with enhanced electric polarisation.

 “This discovery will guide material selection for the development of functional photovoltaic devices in the near future.”

Positive environmental impact

The research team is hopeful that their efforts will eventually have a positive environmental impact by contributing to the field of renewable energy generation.

Urakami concluded: “Our findings have the potential to further accelerate the spread of solar cells, one of the key technologies for environmental energy harvesting and a promising avenue towards a carbon neutral society.”

The researchers hope that this study paves the way for further studies to harness the BVP effect and vastly improve the performance of solar cells, as well as enhance the design of sensitive photodetectors.

The research is published in Applied Physics Letters.